Announcements
New Discussions
rudder bushing install locations?
by cvaty. 09/24/24 11:07 PM
Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
Page 2 of 2 1 2
Re: Has anybody put a self tacking jib on a non-board cat? [Re: TheManShed] #279728
07/02/15 10:31 AM
07/02/15 10:31 AM
Joined: Apr 2004
Posts: 713
WA, ID, MT
davefarmer Offline
old hand
davefarmer  Offline
old hand

Joined: Apr 2004
Posts: 713
WA, ID, MT
Jay,
We have a self tacking battened jib on a straight track on our ARC22, so the jib is always up when the spin is out. When sailing recreationally we just release the jib sheet, and it floats in the slot quite docilely. If we're looking for max power, we can apply a small amount of sheet to get the jib telltales flowing appropriately. Doesn't seem to force us particularly high, although the chute is quite flat and doesn't run real deep.

Dave

-- Have You Seen This? --
Re: Has anybody put a self tacking jib on a non-board cat? [Re: TheManShed] #279729
07/02/15 10:31 AM
07/02/15 10:31 AM
Joined: Apr 2004
Posts: 713
WA, ID, MT
davefarmer Offline
old hand
davefarmer  Offline
old hand

Joined: Apr 2004
Posts: 713
WA, ID, MT
Jay,
We have a self tacking battened jib on a straight track on our ARC22, so the jib is always up when the spin is out. When sailing recreationally we just release the jib sheet, and it floats in the slot quite docilely. If we're looking for max power, we can apply a small amount of sheet to get the jib telltales flowing appropriately. Doesn't seem to force us particularly high, although the chute is quite flat and doesn't run real deep.

Dave

Re: Has anybody put a self tacking jib on a non-board cat? [Re: davefarmer] #279730
07/02/15 11:01 AM
07/02/15 11:01 AM
Joined: Dec 2001
Posts: 5,590
Naples, FL
waterbug_wpb Offline
Carpal Tunnel
waterbug_wpb  Offline
Carpal Tunnel

Joined: Dec 2001
Posts: 5,590
Naples, FL
Thanks Dave,

How far is the jib luff from the spin luff?

Mine is only about 4 feet between them...


Jay

Re: Has anybody put a self tacking jib on a non-board cat? [Re: TheManShed] #279732
07/02/15 11:18 AM
07/02/15 11:18 AM
Joined: Apr 2004
Posts: 713
WA, ID, MT
davefarmer Offline
old hand
davefarmer  Offline
old hand

Joined: Apr 2004
Posts: 713
WA, ID, MT
Yeah, I've got a 15' pole, so probably 7' between pole tip and forestay. Having the jib up actually eases the spin fwd of the forestay, it'll slide off the jib if plastere on to it. It would be more likely to hang up on a bare forestay. If we're paying attention thru the jibe, it's pretty easy to float the clew fwd of the forestay, and pull it thru at the appropriate time.

Re: Has anybody put a self tacking jib on a non-board cat? [Re: TheManShed] #279733
07/02/15 11:18 AM
07/02/15 11:18 AM
Joined: Apr 2004
Posts: 713
WA, ID, MT
davefarmer Offline
old hand
davefarmer  Offline
old hand

Joined: Apr 2004
Posts: 713
WA, ID, MT
Yeah, I've got a 15' pole, so probably 7' between pole tip and forestay. Having the jib up actually eases the spin fwd of the forestay, it'll slide off the jib if plastered on to it. It would be more likely to hang up on a bare forestay. If we're paying attention thru the jibe, it's pretty easy to float the clew fwd of the forestay, and pull it thru at the appropriate time. Overall, we don't have any trouble jibing the spin, and we see more signs of wear from snuffing than jibing it from side to side.

Last edited by davefarmer; 07/02/15 11:20 AM.
Re: Has anybody put a self tacking jib on a non-board cat? [Re: TheManShed] #279751
07/03/15 12:36 PM
07/03/15 12:36 PM
Joined: Jul 2001
Posts: 1,253
Columbia South Carolina, USA
dave mosley Offline
veteran
dave mosley  Offline
veteran

Joined: Jul 2001
Posts: 1,253
Columbia South Carolina, USA
Mike, my friend Kirt Metts has a roller furler jib on his 5.7, not a self-tacker, but he made a smaller(lowered) bridle that allowed him to pin his jib within 2 inches of the front beam. This worked so well I did the same on my 5.0 but I always wanted to go self-tacker. I felt the jib was a little oversized for the 5.0 and way oversized for the 6.0, not sure about the 5.7, never owned one. frown
So you could probably lose a little and still be quite powered up, and with a spin or a reacher it wouldn't matter anyway.
keep the pics coming!


The men were amazed, and said, "What kind of a man is this, that even the winds and the sea obey Him?" Matthew 8:27





Page 2 of 2 1 2

Moderated by  Damon Linkous 

Search

Who's Online Now
0 registered members (), 437 guests, and 102 spiders.
Key: Admin, Global Mod, Mod
Newest Members
Darryl, zorro, CraigJ, PaulEddo2, AUS180
8150 Registered Users
Top Posters(30 Days)
cvaty 1
Forum Statistics
Forums26
Topics22,405
Posts267,058
Members8,150
Most Online2,167
Dec 19th, 2022
--Advertisement--
Powered by UBB.threads™ PHP Forum Software 7.7.1