Announcements
New Discussions
Nacra 5.2 rigging
by northsea junkie. 06/04/19 02:43 PM
Worrell 1000 Reunion
by yacht1255. 05/30/19 02:57 AM
What is up with my rudders?
by yacht1255. 05/30/19 02:26 AM
Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
CL258 and CL259 Clamcleats for Trap Harness #288830
07/20/18 10:04 AM
07/20/18 10:04 AM
Joined: Jul 2018
Posts: 1
Toronto, Ontario, Canada
Beata Offline OP
stranger
Beata  Offline OP
stranger

Joined: Jul 2018
Posts: 1
Toronto, Ontario, Canada
I am looking to install CL258 and CL259 Clamcleats for Trap Harness (for crewing downwind with a spin up). Is there a shop that does that and is there a harness already with these that I can buy? I know that most likely there isn't but just wanted to hear your thoughts :-)

--Advertisement--
Re: CL258 and CL259 Clamcleats for Trap Harness [Re: Beata] #288831
07/20/18 01:11 PM
07/20/18 01:11 PM
Joined: Mar 2009
Posts: 929
Solomon's Island, MD
S
samc99us Offline
old hand
samc99us  Offline
old hand
S

Joined: Mar 2009
Posts: 929
Solomon's Island, MD
Beata,

Negative, that's a DIY mod for serious distance racers. I probably wouldn't do it myself, I use chicken lines for when the wave state is high but simply use a 1/4"/5-6mm S-hook that clips in the trapeze ring. Line runs from pintail into the rear beam on a bungee takeup and back out. My setup lets me get to the shroud, a bit far forward but there are cases where I have single trapped kite reached in very nasty chop (lots of big boats around in mixed fleet distance races, narrow harbors etc.) and I've also found that as long as the crew/helm are on it and neither get launched forward of the shroud recovery from a near pitchpole is possible, but of course the F16 runs out of bow quickly...


Scorpion F18
Re: CL258 and CL259 Clamcleats for Trap Harness [Re: Beata] #288854
07/30/18 06:41 AM
07/30/18 06:41 AM
Joined: Nov 2011
Posts: 380
SE MI / NE IN
rehmbo Offline
enthusiast
rehmbo  Offline
enthusiast

Joined: Nov 2011
Posts: 380
SE MI / NE IN
Hi Bea!

I'm also thinking about installing a setup similar to Sam's. I like the idea of connecting to the trap ring rather than the sailer for the simple fact that you are not 100% attached to the boat in case things go really bad.


Jeff R

H18, C2 USA1193
cramsailing.com
crescentsail.com

Moderated by  Damon Linkous, phill, Rolf_Nilsen 

Search

Who's Online Now
0 registered members (), 22 guests, and 320 spiders.
Key: Admin, Global Mod, Mod
Newest Members
Eugeniofv, Mojosboats, Knotybynature, HawaiiSailor, striker
7919 Registered Users
Top Posters(30 Days)
JeffS 1
Timbo 1
Dermot 1
Forum Statistics
Forums26
Topics22,351
Posts266,884
Members7,919
Most Online795
Apr 8th, 2019
Powered by UBB.threads™ PHP Forum Software 7.7.1