I also finished off some more of the trailer mods I'd started, hold-down bolts are now all machined up and installed .... 1 main one holds the front beam at the mast step and 2 hold the rear beam down. The 2 rears have been machined so that they have a small locating pin and these line up with the spare holes in the rear track..... this holds the boat dead rigid.
front mount:
rear mount in fabrication:
Yar, & this ere post be done without a sin'le drop o' rum passin' me lips
Kingy started with Impara Cadet #3 / Mosquito #245 & now Mosquitos #1182 & #1740