I'm no expert, but here are a couple of other things to check - Out haul all the way off, forced mast rotator over as far as it will go (95 degrees) traveler eased a couple inches and we just started experimenting with easing the main sheet a bit (just pay attention to the mast to make sure it doesn't look to bad).

I'm still working on angles, but have found you need to sail hot. if everything else is set right, the boat will power up, accelerate and let you drive down. It's a fine line, but i've found (the hard way) low and slow is slow. Good luck and let us know if you see any improvements!!

Cheers,