Beam sections are sold in 6.5 mtr lengths and expensive purchase for one beam and until NSW numbers grow we can’t divvy up the left over’s..
I recently purchased a 6.5 metre length of the correct material for a centre beam and it cost $22. It was cut into 2 pieces for nothing at the aluminium distributor to make it easy to transport home and after making the beam I had enough left over to make an axle for my beach rollers. I dont beleive the cost was excessive and the waste is minimal.
I also dont agree with the majority of the rest of your post, best of luck with your boat that was a Mosquito.
Darryn
1782
