The stock Hobie 14 Turbo "system" would require a roller furling forestay and bridles, jib sail, jib blocks, and jib block support wire. Assuming you have a Hobie manufactured 14 tramp, there should be holes on both sides of the center lacing just aft of the front crossbar. The jib blocks attach to the support wire thru the tramp. The hobiecat website has a catalog of Hobie parts and on page 50 is listed all of the items required. If you don't have a jib block holes on your tramp, you will need to address as the jib blocks for a 14 turbo do not mount on the front crossbar.