try to imagine this without a picture. the starboard shroud on my 16 pulled out of the hull taking the top portion of the deck with it. i now have two very large cracks in the top of my deck starting at the ends of the anchor bar and extending across the deck and outward, so on the inboard side of the hull they are about 2 feet apart. the deck is still sealed to the hull on the inboard side so i can open it and look in. any suggestions for repair would be greatly appreciated. should i extend the anchor bar? i can machine a new one. should i run some type of wooden or metal dowels through the fiberglass as i lay it...or on the inside of the hull? this seems like a high stress point so i'd really like to hear from someone whose had this problem before?

thanks for any input
-j