Alex

I see on your signature you have 'Homebuilt' so in that, your boat is timber, and would be painted.

So I would say 2 pak would be the way to go, and could possibly what is on there now.

If you preped the hulls yourself and dropped the hull off at the painters and supplied the paint, thinners etc.. I would guess you could do it for a couple hundred bucks.

If your boat is foam sandwich, and not homebuilt, I would contact Todd Pickering at Geltec in Bendigo and enquire about the best way to go. Chances are Todd built or had a hand in building your boat originally, being with Boyers from the beginning and now owns Geltec Composites.

When I had my boat painted I had the hulls hanging up ready to go, compressor on site, paint, thinners, mixing pot, disposal overalls, paint stirrers, set up on a table, he came, he painted, he left and he charged $70.00

Regards