Ya beat me to it.

Adjusted the rake on the spreader bars to 2-3/4" and cranked the diamond wires back down to about where they were previously. The wind for Saturday looks at this point to be perfect. Running down the lenght of the lake at 10-15mph with the current. So really flat.

Just a note, those purple adjusters for the spreaders on my boat were just about seized up. Luckily a friend left all his tools at my house when he moved to Cali a couple of years ago. He has a VERY nice set of Snap-On taps & dies. I had to run a tap up both of the purple adjusters, and run a die down both of the rods. I'm never buying a salt water boat again.

For your notes, the threads are 6.0mm - 1.0 mm pitch.


I'll swipe someone's Loos gauge and make note of the settings.