Hi Guys,

I've been away from a computer for several days/weeks ... I'm trying to catch up.

When I purchased my P19MX sails from Randy he sent me some typed pages that he photocopied and sent to me .... I
might still have them around here somewhere ... I'll look for them.

But here is what I remember, I'll try to measure my boat this weekend if I get down to the YC.

Mast Rake: measured from the rear-crossbar- approx 24", you should be 4"-6" behind the transome.

Spreader Rake: 1 3/4"- 2"

Mast Prebend: 2" ( this will mean approximently 500lbs of tension on the spreader wires )

Yes, I do remember shortning the rudder crossbar ... I can't remember how much. I think I set the rudders using a fixture and then calculated the new length so that I was in the middle of the adjustment range ... I'll try and remember to measure the crossbar length

Got to run ...
Lots of chores to catch up on

HarryMurphey