Hi all, I have attached a diagram of what I think could yield a working spinnaker setup on my Nacra 5.2.
I will need to be able to operate it single handedly most of the time. I have assembled this information from sources all over the 'net and from my recollection of an actual working F-18 setup.
Would you please look at the diagram and let me know if you think I missed something? I'm trying to integrate a single line halyard / tack setup with a mid-pole snuffer. Does this look right or should I change something around. The diagram is not to scale and omits obvious details like shrouds, pole support bridle and such.
(there's no haste, my budget's run out for this year, so I'm planning next years' goodies ;-)
