Brought "Second Chance" back up to par. Dennis I just finished with the spin addition to my 5.2. She is old but has been completely rebuilt for single handed sailing. Including a self tacking jib, 16-1 cunningham lead to each side, carbon fiber bow foil, carbon fiber spin pole, downhaul on the jib, H16 spin, mid pole snuffer, rudder crossbar mods equal no play, 10-1 mainsheet, mast rotation control lead to each side, jib sheets contained inside front crossbar, and lots more. Here are some pics that might help you with your boat.

[Linked Image]
My 5.2 with out spin

[Linked Image]
H16 spin

[Linked Image]
TackLine

[Linked Image]
Spin Sheet

[Linked Image]
Spin Sheet Blocks

[img]http://www.saylorspecialties.com/nacra/DSC00032.jpg[/img]
Front crossbar and spin bag

[img]http://www.saylorspecialties.com/nacra/DSC00031.jpg[/img]
Bow foil, spin pole.

[img]http://www.saylorspecialties.com/nacra/DSC00029.jpg[/img]
Spin Hoop

[img]http://www.saylorspecialties.com/nacra/DSC00027.jpg[/img]
Line for pole prebend. Found that I need to add a little more bend.

[img]http://www.saylorspecialties.com/nacra/DSC00025.jpg[/img]
Tackline exit and cleat, spin halyard cleat (going to change block and add stand up spring)