Mine goes like this.

From a grommet in the rear corner of the tramp to
an eye strap on the rear beam
forwards through the tramp to
an eyestrap on the front beam to
a grommet on the front corner of the tramp
back to the eyestrap on the front beam to
a grommet on the very front edge of the tramp
and then I tie it off with a truckers hitch.

I just spent about an hour and a half pulling, prying and ripping skin off my hands. Its definetly tighter than it was before. I used a prybar pulling up on the loops on the rear beam and got it pretty good. Its getting too dark here to get a decent pic now.