Hi All,

Another small update - The work has been going slowly due to mid week 'other' work happening...

I have made redone the front supports as they looked a bit frail in the 30mm square. I had enough 50 x 50 5mm from the axle so I used that. I dont think it will ever break grin

Mast support and beam brackets are on. rear supports are made and ready to bolt on.

Costs so far:

Axles $40
Wheels and Tyres $28
Hub Assemblies $84
Coupling $25
Steel $260
Lights, Cables, bolts, paint, bits, etc $150
Springs $44
U Bolts, Shackles, plates, reflectors etc $42

So all up about $700, plus $100 or so for a marine ply coffin big enough for a spinnaker pole and camping gear

Also, things like grinder discs, welding rods, cut off discs, surprisingly add up - Who would have thought confused

Trevor

Attached Files
trailer 4.jpg (541 downloads)
Mozzie 1828
' '
Sugarloaf Sailing Club
Melbourne