Hi all. Just purchased a 2001 N20. Had a question regarding a partially broken mast base casting. I don't have a picture at the moment but the damage is to one side of the casting. Essentially, one of the holes where the clevis pin goes through has broken off. One hole still remains. Is there any danger during sailing in regards to the mast getting knocked off if (when) I capsize or perhaps in strong gusts or maybe another condition?

I was able to step the mast down with no problem for winterizing this past weekend. It seems (from online research) that the two holes for the clevis pin are purely to aid in stepping the mast. But it would be nice to get some ideas from people more experienced.

Also, how involved is the replacement process for a N20 mast base casting if I decide to undertake that. Is it something that can be done by me or should I hire someone to look into it? I don't really have a lot of experience in boat repair.