Mike…Mark is an acquaintance of mine...spent a little time with him and his girlfriend four or five times over a number of years...(known his long time girl friend for 30 years)...have known his office manager for 30 years and use to windsurf with one of his top carpenters. Everyone from his friends to his competitors, clients to employees, speak very highly of him.. I do know he is well respected within the industry for his custom sports fishing boats, many of which are in the multimillion dollar range...top quality. Among a number of other projects, he has been using his five axis CNC router to make high end cold mold boat kits to build an 18.5' flats/bay boat of his own design.
To give you an idea what kind of heart this guy has, my windsurfing buddy Don, asked him about a piece of mahogany that I could use to build a chambered hollow body electric guitar, Mark, also being a guitar lover, "gave" me a huge piece of mahogany (around 3" X 14" X 24") for a guitar body… not a cracked checked piece from the end, but had Don cherry pick a premium piece out of the center of a 13’ long plank (if memory serves me correctly), Not trying to delude you into thinking that he does this for everyone...yes times were better then but regardless...most would want an arm and a leg for a solid piece of mahogany that size... I greatly appreciated his generosity.

Mark reputation for quality is second to none, if you use him for your project he will not disappoint.
It just so happens I saw an article with a section about him and his CNC business in Professional Boat Builder Magazine #121 October/November 2009 Pg 64-67.

Regards,
Bob Hall