Busy weekend - even passed up a day of sailing but I had some help around to lift the hull on and off so I took advantage of the help.
Pics:
1) I put some clay on the bulkhead and place the hull half in place to check the clearance. 2) Sanded out the bulkhead and marked the area for a cutout to get to inside of the hull to finish up the work once the hulls are joined. 3) Kevlar lay-up to shore up the bulkhead and several layers on the face of the bulkhead. Chain plate clamped in place to make sure everything fits.
Mike Shappell www.themanshed.com TMS-20 Builder G-Cat 5.7 - Current Boat NACRA 5.2 - early 70's