The decks are finally fared out. I made the final cut for the **** area with a slight taper from the bow to the stern. To finish it off I will make a molding around the opening once the rest of the hull is fared. Two people can still lift the hull and flip it on the side still not bad for the size of the hull. I took three of the original forms used on the strong back and cut them back some to account for the faring and carpet to use as a cradle in the last picture. Now for the finish faring on the sides of the hull then I’ll be ready for carbon fiber.
Mike Shappell www.themanshed.com TMS-20 Builder G-Cat 5.7 - Current Boat NACRA 5.2 - early 70's