Thanks for the tech help. I'll see if I figured it out.
I used a Harken 36" Aluminum Tiller Extension (part #7100.36 - $56.60) and Aluminum Tiller Extension Mounting Base (Part #7101 - $6.00) The prices are from Harkenstore.com I paid about 10% less at my local chandlery.
Here are some photos of my setup.
002.jpg The mounting base doesn't get in the way at all with the extension removed.
003.jpg Showing position for sailing when sitting on the hump between the seats. The tillers are centred. For me, the position is perfect and allows easy fore and aft movement as conditions merit.
004.jpg Shows position when changing tacks. Unlike universal joints, the rubber thingy at the tiller cross bar end supports the extension, allowing for easy control of it when switching sides of the boat.
