Tack (I don't use a furler, but used to) I went behind the slot on the beam and put a airblock in front of it for a fairlead. I tapped the holes and used machine screws instead of coarse thread self tappers and put 5200 under the cleat. For my jib cleats I used the old jib sliders and can move them inboard or outboard if needed.
"I said, now, I said ,pay attention boy!"
The cure for anything is salt water - sweat, tears, or the sea
Isak Dinesen
If a man is to be obsessed by something.... I suppose a boat is as good as anything... perhaps a bit better than most.
E. B. White
| 
