hi, all,

Nice pic tony, of me in your display pic, haha,
I use a 6:1 system, i have a ronstan 40mm orbit triple block (Rf45301)at the top mounted on a boom hanger ronstan (RF483) about 200mm aft from the rear beam and on an angle and a harken triple block with becket and cleat (Harken 40mm 2613) . i have raised the cleat so its harder to cleat and took off the saddle on top of the cleat (No accidental cleating.
I only cleat when i have the kite up, all other times i hold it in my bare hands on every leg i dont have a kite up!
i also use the old paper tiger / sabre mast section as a boom section which is roughly about 55mm by 45mm section and never had a problem with it!

Matt