Has anybody try using the F16HP Class logo on their sail? The logo may look nice on paper but it is a very impractical logo when it is applied to a sail. It's not reversible and on a transparent sail with the F16 logo in the same place on both sides of the sail, the logo become unrecognizable because the 2 images conflict with each other. On an A-Cat, Tornado and Taipan, you cut a normal image and a reverse image of the logo from the insignia cloth and you apply them to the sail so they coincide with each other. You can't do that with the F16HP Logo.
The other complaint I have with the logo is it has 7 elements which is far too many. For an A-Cat and Tornado, the element count is 3 while on the Taipan 4.9 the count is 4 if you count the "4.9" as 3 elements. Maybe we should loose the 2 parallel bars under the F16 to at least help reduce the element count to 5. Getting the spacing and alignment between the elements just right is also not very easy since there are not many straight edge to use as guides.
Just thought I would bring this issue to everyone's attention. I don't have any alternative designs that would resolve this issue.
