Originally Posted by Reefin Dude
i have an '83 model, but the jib seems to be mounted along the tramp. i guess the beam mounted jib must have been only on the '82 models.

i will look more into the spin setups. i was trying to keep the boat as simple as possible. i have a keelboat for complicated.

thanks,

G~


Then leave it as is... it is a powerful boat and lots of fun..

Like others have said, your time, money, and effort would be better spent upgrading to a spinnaker.

Been there... done this...

Also, while you have the beam down, check the dolphin striker where it goes through the beam... make sure the beam is not corroded.

Also, when you reassemble, be sure to pre-load the beam...

Last edited by Ventucky Red; 05/05/14 08:05 PM.