Thanks for the interest Berny,
The basic dimensions are:
L.O.A. 4.3m
Max' beam 2.2m
Max' mast height 7.8m (although the actual mast is slightly less to allow for variations in the height of the mast base above the front beam)
Max' sail area (main sail no jib) 12.2 sqm (including half the mast area bounded by the sail luff length) (sails by Geof Adams in NSW)
Actual main sail area 12sqm
Spinnaker, flat, assymetric - tack sheeted at the front of the spinnaker pole, head attached to halyard fitted at the mast at 0.175m above the hounds
Two main cross beams, the forward one set at fore and aft centre of the hulls.
high aspect dagger boards and rudders.
Standard with one set of trapeze (provision for another set to be swung for a crew, if so desired)
The mast, beams, boom, and spinnaker pole are all carbon fibre, manufactured by "Applied Composite Technologies" in Melbourne, and the mast section is the same one that Boyer and Goodall use for "A" class cats.
The hulls are layer up with, gel coat,one laminate of 100 gm/sqm CSM, a laminate of carbon fibre, one laminate of 8mm thick, 130KG/sqm divinacell foam, and a laminate of carbon fibre. The resin is vynalester.
We look at putting them on the water, complete and ready to race at about A$10,500 plus GST.
Darryl J Barrett.