Jerry,
The blocks are just sewn to the tramp by hand. I used blocks that you would rivet to a flat surface and sewed thru the rivet holes. The bungee goes thru a saddle in the centre of the rear beam to the centre of the cross arm.
For Tony FX1- the link to the previous post is
http://www.catsailor.com/forums/sho...amp;Main=32979&Search=true#Post33008

The spinnaker halyard cleat is mounted on the tramp. This way the line can go under the main beam and thru hole in tramp. I didn't want the cleat on the main beam.(keeping it all away from the self tacker.)
The yellow line comes from this cleat and just transfers the load from the spi halyard to the rear beam.

Regards,
Phill

I know that the voices in my head aint real,
but they have some pretty good ideas.
There is no such thing as a quick fix and I've never had free lunch!