mike
i sail a f-28R in australia caled scud,in your post you mentioned you had problems hoisting and retreving the kite so i thought i might give u some advise too pass on,
my spinnaker is lanched from the hatches on the side flots,i attached a bag(both floats)witch fits around the rim of the hatch (make shure there are no sharp eges)with prees studes so i can change it over too the other side, u can leave all the sheetes and halyrds on the spinaker and stick it in the hatch ,in it will always stay dry
advise about hosting have 1 man on the side the spinaker is been lanched holding it all togather,
first pull the tack out 1metere past the foward beam
then pull the head as fast as u posobaly can ,hen finish pulling the tack out.
also i have my sheets with abou 1-2meters slack during the hoist with 1 turn around the winch and then cleated in.
another thing are the cluches for the tack and halyard they tend too cloose on the way down,i change mine too the ronstan typ
the whole system works great with two people and even singel handed in 35+ (hapened a couple of times)

ive watched other guys on f-28Rs down in aus with socks and bags on the tramp running it over ripping it ,and screaming at each other , actulery i saw 1 last weekend they ended up running on the rocks

,but at the end of the day ous works best(and cheap)
any moore questions feel free to ask trough my email
taipan029@aol.comregards kurt
F-28R
aus 006
taipan4.9
aus 029