there are a lot of ways to string a halyard/snuffer line. on the N20 the snuffer exits the spin bag and goes through a grommet in the tramp. it then goes to a turning block bungied to the rear beam and proceeds to the front beam where it is cleated off. it heads up at that point to a block on the mast and turns down and connects to the head of the spinnaker. the snuffer line is connected to the spin and has 3 patches for a mid-pole and 2 for an endpole snuffer. the snuffer runs through the hoop and out the back of the spin bag. round and round you go. i use a separate tack line on the N20. good luck
Last edited by Capt_Cardiac; 01/01/10 10:05 PM.
