Announcements
New Discussions
Previous Thread
Next Thread
Print Thread
Rating: 1
Hop To
Page 5 of 5 1 2 3 4 5
Re: Foam strip construction [Re: RetiredGeek] #231436
04/22/11 12:27 AM
04/22/11 12:27 AM
Joined: Apr 2011
Posts: 1
S
soulkeep Offline
stranger
soulkeep  Offline
stranger
S

Joined: Apr 2011
Posts: 1

Thank you suggest, but good things to come.


cabal cabal
--Advertisement--
Re: Foam strip construction [Re: RetiredGeek] #231442
04/22/11 04:47 PM
04/22/11 04:47 PM
Joined: Sep 2007
Posts: 255
NZ
R
RetiredGeek Offline
enthusiast
RetiredGeek  Offline
enthusiast
R

Joined: Sep 2007
Posts: 255
NZ
Forgot to mention that all hydro's pics are at 100kg displacement, but the hull is capable of carrying 135kg
cheers
RG

Re: Foam strip construction [Re: RetiredGeek] #231493
04/25/11 02:19 PM
04/25/11 02:19 PM
Joined: May 2003
Posts: 4,451
West coast of Norway
Rolf_Nilsen Offline
Carpal Tunnel
Rolf_Nilsen  Offline
Carpal Tunnel

Joined: May 2003
Posts: 4,451
West coast of Norway
Two quickies smile

1:
What is your philosophy on how to design the hullform for wave handling (if that is something you feel like sharing). I noticed that your modelling is all done in flat water which I assume is a good starting point for optimization. But wave action changes "everything", or??

2:
What software are you using (I assume something really expensive, and I ask not becouse I want to design a boat becouse I am curious).



The Lindahl build looks really good! Much easier than our strip-plank project. Only thing I dont get is how they fit the trampoline to the hulls.

Re: Foam strip construction [Re: Rolf_Nilsen] #231502
04/25/11 06:08 PM
04/25/11 06:08 PM
Joined: Sep 2007
Posts: 255
NZ
R
RetiredGeek Offline
enthusiast
RetiredGeek  Offline
enthusiast
R

Joined: Sep 2007
Posts: 255
NZ
On the LR3 John used the little tool in the first pic to create the indentation, the final attach looked like what you see in the 2nd pic.

Whether the hull is in flat water or in waves, shapes are driven by drag. Software that can handle waves like Fine Marine / Numeca is hugely expensive and requires an expensive computer to run it also, so we had to come up with another solution. The previous pic's can be generated on a case by case basis in about 10-15 minutes on a laptop, and enough data points for a VPP can be generated overnight, so this capability allows you to look at a lot hull shape variations very quickly which ultimately means you spend 3-5 times the amount of time designing a shape because you can play with so many variables and have an idea of what the consequences of any particular change is. This software is not available commercially at this time, but maybe in the future.

Attached Files
301.JPG (1694 downloads)
302.JPG (1773 downloads)
Re: Foam strip construction [Re: RetiredGeek] #231531
04/26/11 12:14 PM
04/26/11 12:14 PM
Joined: May 2003
Posts: 4,451
West coast of Norway
Rolf_Nilsen Offline
Carpal Tunnel
Rolf_Nilsen  Offline
Carpal Tunnel

Joined: May 2003
Posts: 4,451
West coast of Norway
So the steel pin stay in there and he sands + adds some cloth on top of it. Neat! But looks a bit work intensive. Will unfortunately not work as well for us on our strip plank hulls + ply decks.


Spending time on the computer is OK, if some surprises can be avoided. And you dont have to do all that sanding smile

Thanks for a good reply.

Re: Foam strip construction [Re: RetiredGeek] #231556
04/26/11 05:40 PM
04/26/11 05:40 PM
Joined: Aug 2001
Posts: 1,307
Asuncion, Paraguay
Luiz Offline
veteran
Luiz  Offline
veteran

Joined: Aug 2001
Posts: 1,307
Asuncion, Paraguay
Originally Posted by RetiredGeek


In an update on other stuff, not sure that the original round bilge design is going to make it to production anymore....as with most of the planet, the builder has money issues.

That said, I have been working (very very sporadically) on another F12 design, no builder or customer in mind, more or less for my own pleasure. This is not being offered, nor will it be available to anyone anytime soon....the attached pics are just eye candy.



Sorry to hear that.
Meanwhile I just sold the big tri (see avatar) and will probably look for a new project in a few months. Keep in touch.


Luiz
Re: Foam strip construction [Re: Luiz] #231564
04/26/11 10:44 PM
04/26/11 10:44 PM
Joined: Apr 2002
Posts: 695
Ft. Pierce, Fl. USA
Seeker Offline
addict
Seeker  Offline
addict

Joined: Apr 2002
Posts: 695
Ft. Pierce, Fl. USA
Do you have closer view of the finished product...bit hard for me to tell what kind of impression the "tool" formed from that far away....while you are at it do you have another picture of the "tool" before it is embedded? Interesting method, just trying to get a better perspective on what I am looking at... thank you...

Re: Foam strip construction [Re: Seeker] #231597
04/27/11 06:33 PM
04/27/11 06:33 PM
Joined: Sep 2007
Posts: 255
NZ
R
RetiredGeek Offline
enthusiast
RetiredGeek  Offline
enthusiast
R

Joined: Sep 2007
Posts: 255
NZ
Originally Posted by Seeker
Do you have closer view of the finished product...bit hard for me to tell what kind of impression the "tool" formed from that far away....while you are at it do you have another picture of the "tool" before it is embedded? Interesting method, just trying to get a better perspective on what I am looking at... thank you...


sorry,don't have other pic's, but its essentially a round peg with a stainless cross piece that leaves an indentation. After it sets you insert a stainless pin and carbon over it all, fill, sand and fair....quite a lot of work. It would be easier to insert a wooden block inside and epoxy and screw in some padeyes.

Re: Foam strip construction [Re: RetiredGeek] #231727
04/30/11 12:19 AM
04/30/11 12:19 AM
Joined: Apr 2011
Posts: 1
M
miranbaa Offline
stranger
miranbaa  Offline
stranger
M

Joined: Apr 2011
Posts: 1
What have you really


sbobet sbobet
Page 5 of 5 1 2 3 4 5

Moderated by  Damon Linkous 

Search

Who's Online Now
0 registered members (), 664 guests, and 79 spiders.
Key: Admin, Global Mod, Mod
Newest Members
Darryl, zorro, CraigJ, PaulEddo2, AUS180
8150 Registered Users
Top Posters(30 Days)
Forum Statistics
Forums26
Topics22,404
Posts267,055
Members8,150
Most Online2,167
Dec 19th, 2022
Powered by UBB.threads™ PHP Forum Software 7.7.1