I'd like to know the length of shrouds and forestay for the hobie wave.

I've bought a second hand wave but the wires seem to be too long, I may have to trim them.

You can contact our store by going to www.onlinemarinestore.com or by clicking on the following link: http://store.catsailor.com/tek9.asp?pg=contact

I am not in the store at the time (traveling along and reporting on the Tybee 500 race) but someone is there and can find out the lengths for you.

I know when I rig mine I use a 10 hole adjuster in the front (in lieu of the 7 hole) and remove the adjusters on the sidestays. Still there is quite a bit of slack in the rigging. I believe that is normal.

Rick

Rick, where can some one get a 10 hole adjuster? I looked on your store but couldn't find it. Thanks Jeff

Sure enough, they are there. click on
http://store.catsailor.com/tek9.asp?pg=products&specific=jmoqhqqpr0

THere you will find the 7 and 10 hole shroud adjusters. I found them using the Search at the top right hand corner on the store. That seemed to be the easy way.
Good luck,
Rick

Thanks Rick, just order it now! Jeff