You can't just add more engine to a car, you must stay on the road also....

Some kind of light wind jib is planned but in higher winds it will be uni mode. Adding structure for a jib makes it more complex and more expensive.

The limiting factors for laminate thickness on this size of boat is from the sailing loads, for a beach cat you have other limiting factors like crawling crew members during a capsize, boat handling on the shore and so on. This is probably the reason why you could add a jib to the M20 without any extra carbon in the hulls.

The M32 design uses the twin forestays to get the platform stiff, if you remove them you must replace the twin forestays with something else. The bridle will create high point loads on the hull that must be taken care of and the total side load of the hull will increase.

This boat is uni rigg, if you don't like that buy something else....

/hakan