I think the boat will hold together to get him out far enough to be beyond immediate assistance. It will also be a pig to steer (have you seen the pictures?) as there's square bows and keel turns on all 3 hulls. So it will also take severe loads in big seas as those sharp corners resist the wave engergies.

My bet is the aka's (which are welded tubular sections) will fail either at the ama attachment points or the main hull, or they with just buckle at one of the many sectional welds along their lengths.


He's putting all his hope on the foam filled floatation..."unsinkable" ...but very heavy, little to no free board and not preventing structural breakup.


Mike.