The spar for the Pixie 14 is out of the bag! Profile 124 x 58 length 6.2 m weight 8,8 kgs.
I used no carbon on this one as it was the first try, only BX and UD glass. Material cost less than 100 Euros, about 20 hours of work so far.
If I get it my way, all the fittings on the mast as the spreaders will be done in carbon
and laminated on to the spar.
Phills suggestion for the profile for the Blade mast is 130 x 64 and if I am using the same profile as for this one it would give 135 x 63,5, other ideas?
What about s slight tapering?
