Scarecrow, Yes I have seen and it would be rely nice if you could do that, it’s a little bit beyond my abilities; I would have to use the crystal ball. But there is no real hurry for my part to start with the laminate; I think we will go into April before that. Btw. I will try to get my hands on BX carbon you managed in a very soft way to convince me!! Seeing myself winding UD at 45 deg. clockwise and anticlockwise on a 8,5 m spar using my favourite epoxy whit the best hardener to gain low viscosity but with a pot life of max 45 min... Prefer to destroy the material on the water.
If we could decide on the profile I could start to cut stations and line everything up and do the timberwork.