Thanks Gato. Always interesting to see how others do things. 36gsm is not a lot! I heard that under 100gsm was not really worth the effort, looking forward to hear your opinions after some use. I dont think I have ever seen you use gloves when working with epoxy?? I always lay out the glass on a dry surface, and then add the epoxy on top of the glass. I tried the technique you used in the pics when I started out building stuff but the result was not very good. Mostly my own fault since I did not know about heat and outgassing of the ply, left the boat alone for too long while the epoxy set etc. Perhaps this is more suitable for the builders forum..
My blog.. Just doing the same stuff over and over as we pop out panels, but will update it tonight or tomorrow nigth as I have some new stuff to show.

Now what I really want pictures of is the A-cat striker dolphin structure Wouter describes.