Hey Kris...I see you decided not to get rid of the 5.2! I sent alot of people your way, but am glad you decided to keep the boat. Maybe we can get together one weekend @ the Dike and sort out the spin. I have all the hardware and parts to use the shute so it shouldnt be too hard to figure out.
F17 spin should be the right size for our boats, or whirlwind and other sailmakers are pretty affordable. I just dont want to rum the existing bag launch set up because it clutters the tramp too much. Going from bag to mid/end pole should clean it up but will probably require additional modification?
I just couldn't let her go!! That would be great to meet up and go through the kit setup!! Im going to be getting all new sails from Whirlwind (Main, Jib, Spin; X2 series). Would love to see your setup via emailed pictures if you have some. I am leaving for my offshore job on Friday the 20th and wont be back until August 1st. Im hoping this will give Whirlwind enough time to get all the sails made up and sent to me, would be nice to celebrate xmas early this year when I arrive home.. LOL
I posted up some pics here
http://groups.google.com/group/TCDYC/files?hl=en sailing out on Lake Somerville near Austin,Tx.
Everyone I have seen with a kit setup they all have a rolling furl for there jib. Is this a must or as I suspect to protect your jib during high winds and on the beach from beating around?
Does anyone just sell a kit (i.e. Snuffer Pole, Bag, Ring, and Mast tag with hardware to mounting to boat and forestay attachment)? I have already spoke with a gentlemen from Harken about all the blocks and rigging items, just need the system.
I took a look at the funinthesunweb.com but didn't really see where the parts were located on the site. I have seen on Murray's and Hobie's catalogs they have some universal kits, but is this any good? I do thank you for everyones input.
Keep them flying!!