I still can't see it.

F.5 BOWSPRIT
F.5.1 MATERIALS
(a) Bowsprit materials are optional.
(b ) Bowsprit spar stay materials are optional.
(c ) Bowsprit-to-forestay extension strut materials are optional.
(d) Gennaker retrieval system materials are optional.
F.5.2 CONSTRUCTION
(a) The forward end of the bowsprit spar shall be plugged or capped, and
blunt.
F.5.3 FITTINGS
(a) MANDATORY
1) Gennaker tack block
2) Stays from the bowsprit spar gennaker tack block position and the
bowsprit mid section to the hulls
3) Attachment point fittings for the jib tack and/or jib luff tension
(b ) OPTIONAL
1) Attachment point fittings for the bowsprit-to-forestay extension strut
and jib sheet.
2) A gennaker retrieval system may be attached to the bowsprit or be
integral to the construction of the bowsprit. It shall be suitable solely for
the purpose containing the gennaker and shall not violate rule D.6.2.d.
F.5.4 DIMENSIONS
minimum maximum
Bowsprit spar diameter 38 mm -
Distance of bearing surface of the gennaker
tack lead from the forward edge of the main
beam, measured with the gennaker halyard
pulled tight and the bowsprit fitted to the boat
in its normal sailing position
4000 mm
F.5.5 WEIGHT
minimum maximum
Bowsprit spar, gennaker retrieval system,
fasteners, tack block, halyard/tack line block,
internal tack line and brace stays
2.2 kg -


Though click on Tornado at the official notices link - http://www.sailing.org/olympics/racing/officialnotices.php and the measuring comittee has sail NO to pelican striker