I spoke with Farrier about the F25c being put into production. Start up cost would be around 500k. There maybe Colorado Composites original kits that are not completed but the last ones i saw were around three years ago. You can build an F82R under Ian's new construction method. If you're set on an F25c with carbon/Durakore then you'll have to make an oven to bake/cure it in.

If you're thinking "I'll save some money" that maybe possible but most likely you will be frustrated by the amount of time it takes to build one. Ian has an accurate estimate of construction costs on the Farier Marine web site. There is one nice one for sale on the Windcraft site. Its in Naverre I think. I took the exterior pics at the 2003 Nationals.

Most of the unfinished kits I saw were around 45k+ while a mostly finished can be higher up to a nice one 65k+ . Make sure the rudder is the long after market version. Mine is 42". You cab cartwheel these boats in rollers with the short rudder. Masts are Franspar[bullet proof], Omohundro and a few Marstroms.

As far as Silver Heals I heard it survived the hurricanes but have not had direct communication.