My main hull bow come to a fine point at the tip then grows wider. The bow height is the highest
point of the hull. Also it has a bowsprit on the starboard side of the bow for the screacher and spin.
I have a flair that starts just past the bows very slight at first then significant to the stern.
The family will be back from vacation, they took the camera, I hope to pull the foam out of the mold
again and get some shots of the half hull foamed out to show the shape of the hull and posted it on
the web site.

Today I laminated a foam strip to form the bow stem and started to bog the inside of the hull to fair
it out. What a job there are compound curves and the foam strips lay worse on the inside. The outside
will not be as bad to fair out. I also have a drawing of the ama lines to post I update the website next.

Mike