Trailer.


Mines about there. The lid in back won't be painted in time, but I threw a coat of epoxy on there yesterday on the top side, and a coat on the inside this morning. Mounting that, and a few catches to lock it are the last of the things that have to be done.

Tomorrow morning it hits the road for LaCrosse Wisconsin so I can pick up a Viper, and a NACRA F16 to bring down to F16 Nationals next weekend. Four hundred miles should be a nice shake down cruise. As is right now there is none of the dividers that I would like to have to keep parts from rubbing against one another, but I have a pile of moving blankets that will have to suffice for the time being.


The doors were never sealed in epoxy, and were poorly/hastily painted due to time constraints. They will have to be replaced at some point because of that. Not a big undertaking. Takes me less than an hour to make a couple of doors like that if the cutters are set up in the machines. Might have to do the next set raised panel. lol








The inside of the lid in the back