I bought the trailer from Mike. Thanks Mike!

Only problem is a Hobie 16 won't fit on the bottom. The top crossbar is too short for the front beam of the H16 to fit underneath. This is only a problem for the rear trailer crossbar because the front beam doesn't actually go under the front trailer crossbar.

I need about 4 inches to make it work.

My ideas so far:
1)move the rear trailer uprights to the top of the bottom rear trailer crossbars, instead of the sides - about 2.5 inches
2)place a short extrusion piece between the crossbars to raise the bar up another 2.5"

the double rollers are the same height as the regular rollers so there isn't any height savings there - the cradles are even taller

I could load the boat on the trailer without the rollers and some carpet on the aluminum but thats a hassle.

Any thoughts? I'm stumped short of ordering longer pieces from trailex ($$).

Pictures: https://plus.google.com/u/0/photos/101060848433406822575/albums/5870957660834979297