For what it's worth. After loosing my crew at Hiram's a couple of years ago, he went floating by grabbing at the tiller and rudders to no avail. Afterwards I went back and tied a line from rear beam bolt to bolt. I laced slack in the tramp ties going to the back side of the beam. In other words I have slack loops tucked up in the lacing, so when you go over, now you can pull the line down and it drags behind the boat just past the tiller tie arm. This allows you to drift under the tramp and catch it going out the back side and right at the tiller/rudders. Now, got to see if it works.