Aldebaran VI is up for a 'repaint'. Starts with hand sanding. Dry sand with 120 grit. Slow but ensures removal of the surface but not breaking through the epoxy. Do not want to create bare wood. Will have a few 'running' repairs to perfect when this first process is complete. (Have been using spray enamel on these repairs and this product will also need complete removal before respraying with 2 pack.) The 2 pack thinners finds the enamel very quickly, it dissolves it!

Sanded for 2 hours and all 4 bows sanded to the main beam. Rear half will be quicker as the curved sections are easier to sand. Then its onto finer grits, followed by wet sanding. Will finish with ~600 grit, then spraying.