Announcements
New Discussions
New England 100 2018
by brucat. 07/22/18 06:03 AM
do you carry one of these?
by brucat. 07/21/18 08:59 PM
F16 Effect Crew Weight Solo and 2 Up
by samc99us. 07/20/18 01:12 PM
CL258 and CL259 Clamcleats for Trap Harness
by samc99us. 07/20/18 01:11 PM
Aussie Nacra Nationals 2018-2019
by JeffS. 07/20/18 04:27 AM
What happened?
by Gato. 07/18/18 09:46 AM
W22 Trimaran
by Gato. 07/17/18 02:17 PM
Recreational A-Cat
by mmadge. 07/13/18 06:40 AM
Where did everyone go?
by DennisMe. 07/10/18 09:48 AM
Help locating Center Boards
by TexasTuma. 07/05/18 04:28 PM
Boyer hull moulds have to go
by 11Damo70. 07/01/18 07:33 PM
Hobie Getaway rudder assmbly problem
by David Parker. 06/25/18 04:08 PM
Great Lakes long distance event Around PEC
by pitchpoledave. 06/24/18 06:43 PM
Previous Thread
Next Thread
Print Thread
Rating: 5
Hop To
Page 6 of 9 1 2 3 4 5 6 7 8 9
Re: more build pics [Re: Questioner] #158937
11/01/08 12:24 PM
11/01/08 12:24 PM
Joined: Sep 2007
Posts: 255
NZ
R
RetiredGeek Offline OP
enthusiast
RetiredGeek  Offline OP
enthusiast
R
Joined: Sep 2007
Posts: 255
NZ
Originally Posted by Questioner
that looks fast just sitting there, not to mention that they are probably the best looking hulls Ive seen a long while
Q


Sorry Gato, I have absolutely no idea, but based on previous projects I don't think it has been any more time intensive than anything else Ive done.
Cheers
RG

--Advertisement--
Re: more build pics [Re: Luiz] #158938
11/01/08 12:27 PM
11/01/08 12:27 PM
Joined: Sep 2007
Posts: 255
NZ
R
RetiredGeek Offline OP
enthusiast
RetiredGeek  Offline OP
enthusiast
R
Joined: Sep 2007
Posts: 255
NZ
Originally Posted by Luiz
If you wanted to post 9 pictures, note that the second three were repeated in the third post.
How much would they loose upwind without daggerboards? 2%? More?

Luiz, all the pics are actually slightly different :-)
As for the boards, I have only ever done one previous cat with skegs and no boards to help guess at the difference....lets just say that I won't willing chose to do another skegged boat
Cheers
RG

Re: more build pics [Re: RetiredGeek] #158940
11/01/08 12:43 PM
11/01/08 12:43 PM
Joined: Nov 2006
Posts: 435
Finland
Gato Offline
addict
Gato  Offline
addict
Joined: Nov 2006
Posts: 435
Finland
Just wondering if there is any point in building a hard chained hull in foam? It took me five weekends to put the round bilged Tabby together. smile

Re: more build pics [Re: RetiredGeek] #158948
11/01/08 04:58 PM
11/01/08 04:58 PM
Joined: Aug 2001
Posts: 1,305
Asuncion, Paraguay
Luiz Offline
veteran
Luiz  Offline
veteran
Joined: Aug 2001
Posts: 1,305
Asuncion, Paraguay
Originally Posted by RetiredGeek

Luiz, all the pics are actually slightly different :-)
As for the boards, I have only ever done one previous cat with skegs and no boards to help guess at the difference....lets just say that I won't willing chose to do another skegged boat
Cheers
RG


Indeed. I did not look close enough, maybe just wanting to see more...


Luiz
Re: more build pics [Re: Gato] #158955
11/01/08 10:07 PM
11/01/08 10:07 PM
Joined: Sep 2007
Posts: 255
NZ
R
RetiredGeek Offline OP
enthusiast
RetiredGeek  Offline OP
enthusiast
R
Joined: Sep 2007
Posts: 255
NZ
Originally Posted by Gato
Just wondering if there is any point in building a hard chained hull in foam? It took me five weekends to put the round bilged Tabby together. smile


Gato, other than a slightly lighter weight (7.7kg/hull before fairing) I don't see much of an advantage since we have a minimum weight. Maintenance & weight gain over time probably favors the foam cored build.
Cheers
RG

Re: more build pics [Re: RetiredGeek] #159047
11/03/08 02:03 AM
11/03/08 02:03 AM
Joined: Nov 2006
Posts: 435
Finland
Gato Offline
addict
Gato  Offline
addict
Joined: Nov 2006
Posts: 435
Finland
My question was more about the foam construction. If you are building in foam it seems to me that it's both faster and easier to build a round bilged hull.

Re: more build pics [Re: RetiredGeek] #159048
11/03/08 02:31 AM
11/03/08 02:31 AM
Joined: Oct 2005
Posts: 951
Brisbane, Queensland, Australi...
ncik Offline
old hand
ncik  Offline
old hand
Joined: Oct 2005
Posts: 951
Brisbane, Queensland, Australi...
Lookin' good!

One question though, are they carbon or glass beam sockets?

Re: more build pics [Re: Gato] #159595
11/05/08 07:37 PM
11/05/08 07:37 PM
Joined: Sep 2007
Posts: 255
NZ
R
RetiredGeek Offline OP
enthusiast
RetiredGeek  Offline OP
enthusiast
R
Joined: Sep 2007
Posts: 255
NZ
Originally Posted by Gato
My question was more about the foam construction. If you are building in foam it seems to me that it's both faster and easier to build a round bilged hull.


yes, it is easier to build, the attached pic shows how we did the LR2 and the first of the round bilge F12's are done this way also. The whole boat can be laid up with just 3 widths of foam thats coved on the 4 edges and then just glued to get the 3D shape. I have yet to see an easier method than this
Cheers
RG

Attached Files
build CS_s.jpg (2233 downloads)
Construction Steps
Re: more build pics [Re: ncik] #159596
11/05/08 07:39 PM
11/05/08 07:39 PM
Joined: Sep 2007
Posts: 255
NZ
R
RetiredGeek Offline OP
enthusiast
RetiredGeek  Offline OP
enthusiast
R
Joined: Sep 2007
Posts: 255
NZ
Originally Posted by ncik
Lookin' good!

One question though, are they carbon or glass beam sockets?


Yes, socket tubes are E-Glass and epoxy, but have carbon tabs/reinforcing to hold them in place and spread the loads

Cheers
RG

Re: more build pics [Re: RetiredGeek] #159614
11/05/08 11:38 PM
11/05/08 11:38 PM
Joined: Nov 2006
Posts: 435
Finland
Gato Offline
addict
Gato  Offline
addict
Joined: Nov 2006
Posts: 435
Finland
So, in one way we went into the F12 concept the wrong way. We decided to go for a chained hull (wood) because it would be cheaper and easier to build. At least for my part I have learned something. Even if we keep the original idea of the kids participating in the building the foam/glass construction is easier. At least the foam stripping, that’s like making a jig saw puzzle.

Re: more build pics [Re: Gato] #159620
11/06/08 12:45 AM
11/06/08 12:45 AM
Joined: Sep 2007
Posts: 255
NZ
R
RetiredGeek Offline OP
enthusiast
RetiredGeek  Offline OP
enthusiast
R
Joined: Sep 2007
Posts: 255
NZ
Originally Posted by Gato
So, in one way we went into the F12 concept the wrong way. We decided to go for a chained hull (wood) because it would be cheaper and easier to build. At least for my part I have learned something. Even if we keep the original idea of the kids participating in the building the foam/glass construction is easier. At least the foam stripping, that’s like making a jig saw puzzle.


At least its a fun jigsaw puzzle.....and it will keep on producing fun :-)

Re: more build pics [Re: RetiredGeek] #159657
11/06/08 07:36 AM
11/06/08 07:36 AM
Joined: Oct 2005
Posts: 951
Brisbane, Queensland, Australi...
ncik Offline
old hand
ncik  Offline
old hand
Joined: Oct 2005
Posts: 951
Brisbane, Queensland, Australi...
Oh good, it looked like there was carbon against the aluminium beams, which wouldn't be good.

Re: more build pics [Re: Gato] #160302
11/13/08 02:13 AM
11/13/08 02:13 AM
Joined: Feb 2008
Posts: 14
Paihia New Zealand
B
billby Offline
stranger
billby  Offline
stranger
B
Joined: Feb 2008
Posts: 14
Paihia New Zealand
We like the look of the hardchine hull and chose this form over the round version, the foam should be more durable, also people can use our frames to build in ply if needed. The time it's taken us has nothing to do with the build method; lots of other distractions, the flat panel construction is a simple, low-risk option.
cheers Bill

Re: more build pics [Re: RetiredGeek] #163961
01/04/09 11:35 AM
01/04/09 11:35 AM
Joined: Nov 2006
Posts: 435
Finland
Gato Offline
addict
Gato  Offline
addict
Joined: Nov 2006
Posts: 435
Finland
Originally Posted by RetiredGeek
A few pics to show that work is still continuing :-) ... the hope is that they will see the water by Christmas

Cheers
RG


Did it come true smile

Re: more build pics [Re: Gato] #193050
10/09/09 11:10 AM
10/09/09 11:10 AM
Joined: Apr 2002
Posts: 695
Ft. Pierce, Fl. USA
Seeker Offline
addict
Seeker  Offline
addict
Joined: Apr 2002
Posts: 695
Ft. Pierce, Fl. USA
For a more rounded, softer hull design wouldn’t it make more sense… Instead of cutting the foam in narrow strips and routing all the edges with the subsequent loss of a considerable amount of material, why not just score through 70% of the thickness longitudinally.

Similar to what you did on some of the panels of the hard chine design but with much more precision… (in the raw foam, not foam that has already has been glassed) using a fence and narrow blade in a circular saw where you can regulate the exact depth and width of the cut rather than just free handing it with a 4" grinder. One could also make similar cuts on the horizontal plane at the bow where a compound curve is encountered.

It would seem to save a lot of time and material…that H 80 Divinicell isn’t cheap @ $100.00 US a sheet, and over the course of the boat you would end up with 2/3 rds-to a full 4’X 8’ sheet of foam on the floor in the form of dust.

Re: more build pics [Re: Seeker] #193052
10/09/09 11:28 AM
10/09/09 11:28 AM
Joined: Nov 2006
Posts: 435
Finland
Gato Offline
addict
Gato  Offline
addict
Joined: Nov 2006
Posts: 435
Finland
I don't relly understand what you meen here. If you speek about the strip foam there was not a lotof loss in material. The Tabby was built from two sheets 1.2m by 2.4m 15mm thick.
I ripped the strips with a bandsaw with a very thin blade. As the strips are only 5mm thick there was no routing of the edges.
The total cost of foam (Airex) was about 150 USD.

Re: more build pics [Re: Gato] #193069
10/09/09 12:08 PM
10/09/09 12:08 PM
Joined: Apr 2002
Posts: 695
Ft. Pierce, Fl. USA
Seeker Offline
addict
Seeker  Offline
addict
Joined: Apr 2002
Posts: 695
Ft. Pierce, Fl. USA
Hi Gato
I was referring to the build method they used for the LR2.
Talking 4' X 8' plain Divinicell sheets and ripping it into strips and doing the cove routing method. H-80 Divinicell 3/8" thick, not Airex, and each sheet are $100 US at this point in time...and that is 1/2 of the list retail price.
In regards to the quanities I quoted...I was using the amount of material needed to build my F-14 design..so if the waste figure seems a bit excessive that's why...

I would have taken this to the home building forum but there is not a lot of action there...not that the F-12 is a fire ball either.

Last edited by Seeker; 10/09/09 12:49 PM.
Re: more build pics [Re: Seeker] #193128
10/10/09 01:07 AM
10/10/09 01:07 AM
Joined: Nov 2006
Posts: 435
Finland
Gato Offline
addict
Gato  Offline
addict
Joined: Nov 2006
Posts: 435
Finland
It seems to be the same on the F14 forum. Still I'm thinking of building one

Re: more build pics [Re: Gato] #193130
10/10/09 03:24 AM
10/10/09 03:24 AM
Joined: May 2003
Posts: 4,451
West coast of Norway
Rolf_Nilsen Offline
Carpal Tunnel
Rolf_Nilsen  Offline
Carpal Tunnel
Joined: May 2003
Posts: 4,451
West coast of Norway
There is plenty of interest, but few acually goes to the step of building a boat.

I am up to my ears in sawdust. Last night I pulled about a 1000 staples from an F16 hull panel. I would like to do a F12 but completing the three F16s have first priority.

Re: more build pics [Re: Rolf_Nilsen] #193207
10/11/09 07:36 PM
10/11/09 07:36 PM

S
Scarecrow
Unregistered
Scarecrow
Unregistered
S


What I'm finding (which is not a surprise) is that everyone wants an off the shelf product and ideally an established fleet. I've got all the bits here for a DS12 but as I'm working in excess of 70 hours a week at present and don't actually have a kid, it will be staying a pile of bits for a little longer yet.

Page 6 of 9 1 2 3 4 5 6 7 8 9

Moderated by  Damon Linkous 

Search

Who's Online Now
1 registered members (Isotope235), 27 guests, and 234 spiders.
Key: Admin, Global Mod, Mod
Newest Members
Mikeylikesit, Beata, PiratesCoveCat, knussy, reiser5
7809 Registered Users
Top Posters(30 Days)
brucat 9
JeffS 4
Gato 3
Beata 1
Forum Statistics
Forums26
Topics22,313
Posts266,617
Members7,809
Most Online554
May 12th, 2017
Powered by UBB.threads™ PHP Forum Software 7.6.1.1