ok, so I know I don't have a lot of "cred" in the F16 class, but I am pushing that there be a lot of uni F16s at midwinters in pensacola in March. Specifically March 19/20.I have clearance for it from the wifey so will be there 18,19,20. I assume CAB will be there. Anyone else showing up? If you are planning on showing up 2-up please consider going uni!!!!

I can't make it. I have GYC in early April and I'm trying to get to Spring Fever in late April.

If the scheduling was different, either the weekend before or after Spring Fever that might make a difference.

Umm... there is a bunch of stuff going on at WRSC around Nationals time. Maybe petition them to designate a Uni fest? I'll kick in a couple of bucks for the "trophy"!

At this time, I do plan on being there, unless work gets in the way! UNI I will be.

Just a note, we will be put in the portsmouth/open class. Who says we can't do our own trophies!

I need dates. Pete, when is the GYC A-F16 regatta (or what ever they are calling it this year) and when is Spring Fever Thanks.

And where is CAB and where is that picture of his new mainsail?

Spring Fever is always Easter weekend. Fri-Sun racing and a 2 day option for those coming late or leaving early. Would love to see you all there!!!
twinhulls.com is the link

Yeahbut...I have no idea when Easter weekend is...it changes every year.

OK...I just got off my fat butt and looked at my Wife's callendar, Easter Sunday is April 24 this year.

So far we have;

March 19-20 for PNS

April 9-10 Gulfport

April 22 (Friday), 23, 24 for Spring Fever

Wanna go Mano-a-Mano at Gulfport?

I probably won't have a choice and it's usually blowin' like stink. So, I'll do well just to stay upright.

But, yeh! Bring it tough guy!

My 14 yr. old daughter has been making noises about wanting to sail with me, I think she just wants to meet Taylor and Matthew though...so I -might- have her with me at Gulfport, and if I go to Spring Fever, I may have to bring her too, just to get the wife to let me out of the house. She has never run a spinnaker so she will be in the way more than any help there, but I'll see if she might want to ride on a crash boat for a day while I go Uni, probably on day two, after her hands are trashed from day 1 spin work!

you get a new traveler track yet?
how are you going to install it?

Matt's sending me one today, I'm going to use stainless screws all the way, if I can! I think I'll have to pull out the hull bolts though to get access to the ones at the very ends, near the beam bolt. I am going to try the old 10mm wrench taped to the end of the batten...again...but last time it took me forever just to get one in the middle of the track, so I don't know how long it will take to do 20 of them!

Tim- I did riv-nuts on the traveler track on my last Viper, and I'll be doing the same on the new one. I bought allen head screws for mounting the track that were attractive when the track was off and put back into the holes.

I do question the long term durability, but there really isn't that much force there, and it is spread out amongst eight fasteners.

****. Main traveler.....

Thanks Karl...now...what's a riv-nut and how does it work?

You can find dates [HERE]

It is also locked as a link at the top of the Open Forum

yeah, you should pull out the beam bolts to get to them. remember to do the furthest one first. My trav was pulling up a little in the center and I replaced something like 5 or so of the rivets with SS screws. I didn't take me forever, but it wasn't pleasant

Karl's always trying to show everyone his riv nuts

Seriously, its a neat setup. They are rivets that have threads in the opening. So after they are installed, you have multiple places where the old rivets were to screw your track to the beam.

Makes it easy to install or remove the jib track for those of you who switch back and forth from sloop to uni.

Oh, just realized you are talking about the main on the rear beam.