Announcements
New Discussions
Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
Drilling/replacing old rivets. #72300
04/10/06 09:47 AM
04/10/06 09:47 AM
Joined: Apr 2005
Posts: 292
Ontario, Canada
Captain_Dave Offline OP
enthusiast
Captain_Dave  Offline OP
enthusiast

Joined: Apr 2005
Posts: 292
Ontario, Canada
I have noticed a few loose rivets in a rear corner casting as well as in the jib-car tracks.

I have a good (big) rivet tool and my question is: Is it best to drill out old rivets and simply re-rivet a replacement, or is it better to drill a new hole for a new rivet? Any advice/tips?

Thanks

Dave

-- Have You Seen This? --
Re: Drilling/replacing old rivets. [Re: Captain_Dave] #72301
04/10/06 10:31 AM
04/10/06 10:31 AM
Joined: Nov 2005
Posts: 5,582
“an island in the Pacifi...
hobie1616 Offline
Carpal Tunnel
hobie1616  Offline
Carpal Tunnel

Joined: Nov 2005
Posts: 5,582
“an island in the Pacifi...
I replaced rivets and used the old holes with no problems. If the holes have grown you'll want to use rivet casings. Murray's carries them part #19-5020.


US Sail Level 2 Instructor
US Sail Level 3 Coach
Re: Drilling/replacing old rivets. [Re: hobie1616] #72302
04/10/06 10:33 AM
04/10/06 10:33 AM
Joined: Jul 2005
Posts: 306
St. Louis, MO
hobienick Offline
enthusiast
hobienick  Offline
enthusiast

Joined: Jul 2005
Posts: 306
St. Louis, MO
Also, when drilling out old rivits you want to use an oversized drill and just drill off the head of the rivit. This way you don't chew up the exisiting hole. Just be careful not to drill too far into the rivit.


Nick

Current Boat
Looking for one

Previous Boats
'84 H16
'82 H18 Magnum
'74 Pearson 30
St. Louis, MO
Re: Drilling/replacing old rivets. [Re: hobienick] #72303
04/10/06 11:16 AM
04/10/06 11:16 AM
Joined: Apr 2005
Posts: 292
Ontario, Canada
Captain_Dave Offline OP
enthusiast
Captain_Dave  Offline OP
enthusiast

Joined: Apr 2005
Posts: 292
Ontario, Canada
Thanks fellas,

I didn`t know about "rivet casings". Glad I do now - what handy little things those must be.


Dave


Dave

Re: Drilling/replacing old rivets. [Re: Captain_Dave] #72304
04/10/06 11:27 AM
04/10/06 11:27 AM
Joined: Sep 2005
Posts: 1,187
38.912, -95.37
_flatlander_ Offline
old hand
_flatlander_  Offline
old hand

Joined: Sep 2005
Posts: 1,187
38.912, -95.37
I like to use an angle grinder for the rivet heads, never had a rivet spin on me.


John H16, H14
Re: Drilling/replacing old rivets. [Re: Captain_Dave] #72305
04/10/06 11:28 AM
04/10/06 11:28 AM
Joined: Jul 2005
Posts: 306
St. Louis, MO
hobienick Offline
enthusiast
hobienick  Offline
enthusiast

Joined: Jul 2005
Posts: 306
St. Louis, MO
They are also nice when using SS rivits on aluminum. If you get a nonreactive material (like Monel) it will reduce the corrossion at the rivit.


Nick

Current Boat
Looking for one

Previous Boats
'84 H16
'82 H18 Magnum
'74 Pearson 30
St. Louis, MO
Re: Drilling/replacing old rivets. [Re: Captain_Dave] #72306
04/10/06 11:33 AM
04/10/06 11:33 AM
Joined: Nov 2005
Posts: 5,582
“an island in the Pacifi...
hobie1616 Offline
Carpal Tunnel
hobie1616  Offline
Carpal Tunnel

Joined: Nov 2005
Posts: 5,582
“an island in the Pacifi...
Quote
Thanks fellas,

I didn`t know about "rivet casings". Glad I do now - what handy little things those must be.
They are! Here's a question for the general population of this forum. Does anyone know of a place that sells different sizes of rivet casings? TIA


US Sail Level 2 Instructor
US Sail Level 3 Coach

Moderated by  Damon Linkous 

Search

Who's Online Now
0 registered members (), 174 guests, and 71 spiders.
Key: Admin, Global Mod, Mod
Newest Members
Darryl, zorro, CraigJ, PaulEddo2, AUS180
8150 Registered Users
Top Posters(30 Days)
Forum Statistics
Forums26
Topics22,405
Posts267,058
Members8,150
Most Online2,167
Dec 19th, 2022
--Advertisement--
Powered by UBB.threads™ PHP Forum Software 7.7.1