For our Blade F16 project we need some ideas. We are working in my garage, and there is just the usual "holes in the wall" and under the garage port for ventilation. Last winter we used some 200W bulbs directly over the hull panels to heat them while the epoxy set. It worked, but I was not impressed with it. The garage is not insulated very well, so we need some KWs from our heatsource.

A fellow builder here in Norway use a paraffine/diesel heater for his workspace. I have been thinking about a natural gas heater. Using electricity is not very economic anymore..

What do people use, and what kind of precautions do we need to take with the different options? Risk of fire is something I denfiately want to minimize!