| Re: Jib traveler control system
[Re: Wrinkledpants]
#12200 11/07/02 04:54 PM 11/07/02 04:54 PM |
Joined: Jun 2001 Posts: 16 Florida Hobiedoc
stranger
|
stranger
Joined: Jun 2001
Posts: 16 Florida | You can make a very good traveler system relatively inexpensive by just riveting a bullet block on each front corner casting and one small cam cleat [with wedge] just a few inches from the bullet block. Use hog clips to attach control line from your combination traveler and cleat so that the stop pin is always up. Then attach a piece of bungee cord from the port and starboard jib traveler cleat comb. so the cars will return to the inboard end of track except when you cleat the traveler car out with your control line. Welcome to A Fleet book has a few different options. Contact me directly and I can scan the page from the book.
Stew
Stew Barcalow Fort Lauderdale
| | |
|
0 registered members (),
581
guests, and 93
spiders. | Key: Admin,
Global Mod,
Mod | | Forums26 Topics22,405 Posts267,056 Members8,150 | Most Online2,167 Dec 19th, 2022 | | |