Hehe... just kidding....

I have my barber hauler rigged as the image shows… a floating peace on the jib sheets (circled in green) then the line (highlighted in yellow) runs through a very small block (at the far ends) and cleat on the beam.

There are many ways to rig this, and you could probably run through your front beam (and end caps) to avoid drilling and rivets in your beam....

Next time you sail, just ask other boaters if they have one and see how they run it.

If you use the search feature here.. there is alot of data.




Yup - it is also the pulley system that you sheet the mainsail in with, and the pulley you sheet the jib in with....etc