ohhhhhhhhhhhhh that makes perfect sense <img src="http://www.catsailor.com/forums/images/graemlins/tongue.gif" alt="" />

OK so any "pulley" is called a block?

Thanks for the pictures guys. Having them helps me a lot. I'm more of a visual learner.

I'm trying to think how I would do this without doing any drilling.

I suppose I could tie a line around the front beam between the hull and the tramp. There's just enough space to get a line through there. I could make a loop in the line and then tie it there, and then thread the barber hauler line through the loop and then to the jib sheet. but I'm not sure how I would cleat the hauler line...

Maybe attach another block at the point the jib's are attached?


Hey andrew, I like that netting you've got set up on your tramp btw.

I don't like transporting the Nacra with the rudders attached and when the kiddo is traveling with us I don't have enough room to put them in the Subaru. Maybe I could lay them on the tramp and secure them with some cargo netting....

So many ideas so little time