Mike I really appreciate you giving such a detailed response...you confirmed all my suspicions.
Without going thru all your past posts on the subject, did you add a liberal amount of glass bubbles to your epoxy to glue the foam strips together? I have had good luck in the past sanding the glue joints in H80 when you really load up heavy on the glass bubbles.
Thank you again for your generosity in sharing your experience.
Best Regards,
Robert
No problem I have not worked with the H-80. I bought a sheeet of 1/2 for the bulkheads but not that far along yet. I started with the tube of west - easy too expensive, then I used 410 bog, 407 bog, then just straight epoxy. All the Farrier guys are using gorilla glue (gg) now. I'm going to check back with West, Ian Farrier, my NA, and DIAB about GG plus do a test panel. With the Cove & Bead most of the glue surface is hidden anyway.
